Friday, February 21, 2014

Charity Runs Events


Hello! My name is Lucy. I am currently training for the Run Disney Half Marathons; I want to show that people of all shape and sizes, even those with weight issues, can do this! I want to prove that anyone can do this and act as a role model for who think that they cannot. My goal is to raise as much funds as possible to help some organizations of my choice and the funds will be donated.

Lists of organizations are:

ASPCA and Homes for Our Troops - Walt Disney World Half Marathon
Special Olympic of Southern California - Tinker Bell and Disneyland Half Marathon
The Leukemia and Lymphoma Society - Disney’s Princess Half Marathon
Autism Speaks - The Twilight Zone of Terror 10-miler Marathon

These organizations can provide service assistance for families in needs, financial aid for the families of participants and specifically the sport-training program. I also believe in these organizations what they are doing and have seen impact that they have made in people’s lives.

I’d love to have your support to help me reach my dream of participating in charity runs. Every $10 helps and it is easy to donate.

Here is Link Below:
http://gogetfunding.com/project/charity-runs-events

Thank you very much for your support!

Education Assistance


Hello! My name is Lucy I was born and raised in San Francisco I been unemployed over 3 years since August 2008, at the same time I just enrolled in to college as full time student. I'm currently sophomore at AMU (American Military University), major in Bachelor of Art Degree in Criminal Justice Program. I'm trying to raise funds to pay for my tuition and also help to pay off partly of student loans while I'm still in School. My dream goal is to complete my Bachelor of Art in Criminal Justice degree program, so I can move on to Master of Art or Science in Criminal Justice and other degree program. Unfortunately my Federal Student Financial Aid is running out and might not had enough to cover my classes and textbook expenses. I’d love to have your support to help me reach my education and dream goal, also help me lift the weight out my shoulder and less worry about how to come up with funds to cover my classes or textbook expenses. Every $10 helps and it easy to donate.
 
Here is Link Below:
http://gogetfunding.com/project/education-assistance

Thank you so much for your support!

Friday, February 14, 2014

Happy Valentine's Day Everyone xoxo

"Heart in the Bubble"

Materials I need on this project are: 
  • Perler Bead (Red, Clear, Black, White and Pink)
  • Small Square Peg Board

Thursday, July 25, 2013

Ms Piggy Shaped Card

Happy Thursday Everyone,

Please Click on the Video Below: 

 "Ms Piggy's Shaped Card"

"Inside of Ms Piggy's Shaped Card"

Occasion: Just Because
Cricut Cartridge: Create a Critter

Type of Card: Shaped Card
Card Measurement: 5" inches

No Mats

Materials I use on this card are:
  • Stampin Up Card Stock Current Colors and Retire Colors
  • Pink Card Stock From Recollections
  • Glitter Specialty Paper From American Crafts Raspberry (Fuchsia) and Grape (Lavender)
  • Dry Adhesive, 2 Ways Glue Pen and Scotch Quick-Dry Adhesive
  • Sakura White Gel Pen

Wednesday, July 24, 2013

Strawberry with Chocolate Shaped Card

Hi Everyone,

Please Click on the Video Below:

 "Strawberry with Chocolate Shaped Card"

"Inside of Strawberry with Chocolate Shaped Card"

Occasion: Just Because
Cricut Cartridge: Sweet Shop

Type of Card: Shaped Card
Card Measurement: 4" Inches

No Mats

Materials I use on this card are:  
  • Stampin Up Card Stock Current Colors and Retire Colors
  • White Card Stock From Recollections
  • Glitter Specialty Paper From American Crafts Brown (Chestnut)
  • Dry Adhesive, 2 Ways Glue Pen and Scotch Quick-Dry Adhesive
  • Cuttlebug Embossing Folder "Swiss Dots"
 Happy Crafting!

Saturday, July 13, 2013

Welcome to My Facebook Page

Hi Everyone,

I created a Facebook page 2 days ago, I just finish updated all my cards that I made last couple years in to albums today, so easier for you to check them out my handcrafted cards. I will be post new card ideas and videos to showcase my new projects; you also can post your handcrafted card to share with others by posted on here with short story about your card.

Here is the Link: https://www.facebook.com/pages/My-Crafts-Studio/386708464774075?ref=hl

Happy Crafting !!!

Wednesday, July 10, 2013

Bee Teddy Bear Card

Please Click on the Video Below: 


Occasion: Just Because
Cricut Cartridge: Teddy Bear Parade

Type of Card: Standard A2 Size Card (4 1/4" x 5 1/2")
Card Measurement: Cut 8 1/2" (Length) x 5 1/2" (Wide) Score in half 4 1/4"

Mats (2) Size: 4" x 5 1/4"

Materials I use on this card are:  
  • Stampin Up Card Stock Current Colors and Retire Colors 
  • Stampin Up Pastels Chalk (Pretty in Pink) 
  • Glitter Specialty Paper From American Crafts Yellow (Sun flower).
  • Dry Adhesive, 2 Ways Glue Pen and Scotch Quick-Dry Adhesive
  • Action Wobble
  • Peachy Keen Stamps Teddy Bear Face Assortment (1" Face) 
  • Memento Tuxedo Black ink Pad
  • Sakura White Gel Pen
 Happy Crafting!

Saturday, July 6, 2013

How to Make Soy Candle Jars

Hi Everyone,

I have other craft project share with you today how to make soy candle jars, this is my first time making it myself.

Please Click on the Video Below: 

Please just beware in my video I keep saying 18oz jar instead 8oz jar lol.

"Color: Ivory & Scent: Pina Colada"

"Color: Orchid & Scent: Hawaiian Breeze"

The List of Things You Need to Get Started:
1. What size of glass container you like to use.
2. Type of wax you like to use, I use Golden 464 soy wax, because ECO friendly and NO SOOT also highly recommend.
3. Any Scale will do.
4. Melting Pouring Pitcher.
5. Any thermometer will do.
6. Dye Chip, you can make the candle with no color.
7. 1 oz fragrance oil
8. You can use unwanted clean stir like wooden chopstick or spoon.
9. Wick Bar, some people like to use chopstick or cloth pin to hold the wick.
10. Wick Sticker or you can use heat glue to hold your wick in place, but I prefer wick sticker because easy to remove and re-use the glass container.

Here is the link where you can get your candles supply from: www.candlescience.com or www.peakcandle.com

when you purchase one fragrance oil they send you other one as free sample fragrance oil or pick one your choice fragrance oil with your order.

How To Make Soy Candle Jar:
1. You can use hot plate stove or double boiler in middle fire.
2. Weight your wax in a bowl or melting pouring pitcher in 1 lbs.
3. Apply the wax from melting pouring pitcher to pot of boiling water and wait for the wax to melt, make sure to stir it time to time until the wax turn to form of liquid.
4. Use the thermometer to check the temperature for 185 F before add your dye chip and fragrance oil, people recommend 2 table Spoon fragrance oil per a pound of wax   and mixed in together, but I pour the whole 1 oz fragrance oil bottle in, so will give me better scent throw. Also depend on what wax you need, some wax can use lesser fragrance oil to better scent throw as well.
5. Let the wax temperature cool down between 135 F to 125 F before pour it in to your glass container.
6. Preheat your glass container with any heat gun and temperature need to meet around 120 or 125 F before you adding your wick in the glass container and position the wick bar to hold wick in place, so your wick don't move around before pouring.
7. Stir it again before slowly pour in to the glass container, so the fragrance oil won't be in the bottom of wax.
8. Let it sit overtime in a room temperature, cut the wick in 1/4" of inches after harden, make sure use heat gun to remove unwanted bubbles and the candle ready to burn after a week or 2 to settle.

If you see some frost inside of glass container that mean something wrong with temperature issue must need to do some adjustment with the temperature like cooling to fast or not in the right temperature. Pretty much you just need to play around with it to see the finish candle how it turn out.

Happy Candle Making !!!

Friday, July 5, 2013

Teddy Bear Birthday Cards

 Please Click on the Video Below:

 "Teddy Bear Birthday For Boy"

"Teddy Bear Birthday For Girl"

Occasion: Birthday
Cricut Cartridge: Teddy Bear Parade

Type of Card: Standard A2 Size Card (4 1/4" x 5 1/2")
Card Measurement: Cut 8 1/2" (Length) x 5 1/2" (Wide) Score in half 4 1/4"

No Mats

Materials I use on this card are:
  • Stampin Up Card Stock Current Colors and Retire Colors
  • Stampin Up Dazzling Diamond Glitter 
  • Stampin Up Pastels Chalk (Pretty in Pink) 
  • White Card Stock From Recollections
  • Glitter Specialty Paper From American Crafts Yellow (Sun flower), Hot Pink (Lips sick), Sliver and Brown (Chestnut)
  • Dry Adhesive, 2 Ways Glue Pen and Scotch Quick-Dry Adhesive
  • Peachy Keen Stamps Teddy Bear Face Assortment (1 3/8" Face) 
  • Memento Tuxedo Black ink Pad
  • Sakura White Gel Pen  

Panda Scallop Birthday Card

Hi Everyone,

Please Click on the Video Below:


Occasion: Birthday
Cricut Cartridge: Teddy Bear Parade, Create a Critters and Birthday Bush

Type of Card: Scallop Card (Birthday Bush)
Card Measurement: Cut 4 1/2" from Birthday Bush

Mats (2) Size: 4 1/2"

Materials I use on this card are:
  • Stampin Up Card Stock Current Colors and Retire Colors
  • Stampin Up Dimensional 
  • Dry Adhesive, 2 Ways Glue Pen and Scotch Quick-Dry Adhesive
  • Glitter Specialty Paper From American Crafts Hot Pink (Lips stick), Aqua, Sliver, Yellow (Sunflower) and White.
  • Wiggle Eyes (5mm)
  • Sakura Sliver Metallic Gel Pen
  • Cuttlebug Embossing Folder "Swiss Dots"

Thursday, June 13, 2013

Disney's Princess Half Marathon Fundraiser Update

Hello Everyone,

I would like to update you about my fundraiser status from May 13 up to now so far I have raise $10.00 in person pledge and no online pledge yet. Please spread the word out to your family and friends and share my fundraiser on your blog, facebook or twitter. 

Start Your Pledge Today @ http://gogetfunding.com/project/disney-s-princess-half-marathon-weekend-2014

Thanks for Stopping By & Your Support !!!

Friday, May 24, 2013

Follow me on Twitter

Hi Everyone,

Now you can follow me on Twitter

Here is the link:
https://twitter.com/MyCraftsStudio

Enjoy your Memorial Day Weekend & Be safe out there !!!

Sunday, March 10, 2013

How to Cut Chipboard with Cricut Expression or Cricut Mini

Hi Everyone,

There were question about Can I use my cricut expression machine or Cricut Mini cut Chipboard, the answer is YES the cricut expression machine or cricut mini can cut on chipboard. first of all you need to get a deep cut blade housing in order cut the chipboard, then you need to install the deep cut blade housing, set the machine in Speed 3 (Medium), Pressure Max or 4 (High) depend on how thick the chipboard, Blade depth 6 and Multi Cut 4. I requested a sample 0.50 thickness of chipboard sheet from ULine.com before I purchase a 470 pieces (case) of 8 1/2" x 11 chipboard sheets, they don't come with 12 x 12 in 0.50 thickness of chipboard sheets and they don't come with packs either. After that, I chose the Koala at Create a Critters 2 to do the test cut with my cricut expression machine and it did cut all the way though. You also can use cereal boxes or Soda boxes like pack of 12, that you don't need to use deep cut blade housing you just need to do multi cut 2 to 3 times and set everything in Max, but the sheet will be very thin and good for chipboard letters not for mini album.

 "Cut @ 4 1/2" Inches"
Happy Crafting !!!

Thursday, January 31, 2013

Suger Plum Teddy Bear Fairy Card


Occasion: Just Because
Cricut Cartridge: Teddy Bear Parade

Type of Card: Standard A2 Size Card (4 1/4" x 5 1/2")  
Card Measurement: Cut 8 1/2" (Length) x 5 1/2" (Wide) Score in half  @ 4 1/4" 

Mats (2) Size: 4" x 5 1/4" 

Materials I use on this card are:
  • Stampin Up Card Stock Current Colors and Retire Colors
  • Stampin Up Dimensional 
  • Stampin Up Corner Ticket Punch
  • Dry Adhesive, 2 Ways Glue Pen and Scotch Quick-Dry Adhesive
  • Glitter Specialty Paper From American Crafts Sliver, Fuchsia (Raspberry), Yellow (Sun flower) and White
  • Sakura White Gel Pen
  • Swarvoski Crystal Flatback "Crystal and Fuchsia" ss7 (2mm), "Fuchsia" ss12 (3mm) and "Rose and Light Rose" ss16 (4mm) (Apply by hand with E6000 Glue)

Sunday, January 20, 2013

San Francisco 49ers Teddy Bear Pride Card

Hi Everyone,

As you know the San Francisco 49ers win the Division Championship today, we are on the way to the Super Bowl. we haven't been to super bowl for a long time since 1994, the Division Championship from last year was close game, that how I came up with card. What I did was apply Dazzling Diamond Glitter on the clouds with 2 way glue pen as always, all the teddy bear pieces cut @ 3" inches, the clouds cut @ 1 1/2" inches, strip of grass cut @ 1 1/2" inches (Length) x 4" (Wide), the goal poll cut @ 3" inches and apply Xmas Red Stickles on the helmet. 

"Congratulations San Francisco 49ers"

Occasion: Special Occasion
Cricut Cartridge: Teddy Bear Parade, Everyday Paperdolls and Create a Critters

Type of Card: Standard A2 Size Card (4 1/4" x 5 1/2")  
Card Measurement: Cut 8 1/2" (Length) x 5 1/2" (Wide) Score in half  @ 4 1/4" 

Mats (2) Size: 4" x 5 1/4" 

Materials I use on this card are:
  • Stampin Up Card Stock Current Colors and Retire Colors
  • Stampin Up Dazzling Diamond Glitter 
  • Stampin Up Dimensional 
  • Stampin Up Corner Ticket Punch
  • Dry Adhesive, 2 Ways Glue Pen and Scotch Quick-Dry Adhesive
  • Glitter Specialty Paper From American Crafts Gold and White
  • Xmas Red Stickles
  • Sakura White Gel Pen and Yellow Metallic Gel Pen

Friday, January 18, 2013

On Vocation Teddy Bear Card

Who want to go on vocation? lol this is one of my favorite card that I make so far on the series, the card came out pretty cool like the teddy bear looking out for something at a place could be anywhere. The teddy bear I decided to change to a different color instead of brown teddy bear, I also apply Dazzling Diamond Glitter on the clouds with 2 way glue pen as always, all the teddy bear pieces cut @ 3 1/2" inches, the clouds cut @ 1 1/2" inches, strip of grass cut @ 1 1/2" inches (Length) x 4" (Wide) and I add a swarvoski crystal hotfix  on the bow and hand apply on the sunglasses.


Occasion: Just Because
Cricut Cartridge: Teddy Bear Parade and Create a Critters

Type of Card: Standard A2 Size Card (4 1/4" x 5 1/2")
Card Measurement: Cut 8 1/2" (Length) x 5 1/2" (Wide) Score in half  @ 4 1/4" 

Mats (2) Size: 4" x 5 1/4" 

Materials I use on this card are:
  • Stampin Up Card Stock Current Colors and Retire Colors
  • Stampin Up Dazzling Diamond Glitter 
  • Stampin Up Dimensional 
  • Dry Adhesive, 2 Ways Glue Pen and Scotch Quick-Dry Adhesive
  • Glitter Specialty Paper From American Crafts Black, Chestnut (Brown), Grape (Lavender), Aqua and White
  • Swarvoski Crystal Flatback "Crystal" ss16 (4mm) and ss5 (1mm) (Hand apply with E6000 Glue and Hotfix)

Thursday, January 17, 2013

Clown Teddy Bear Birthday Card

Can't forget to invite the clown to a Birthday Party lol, I apply Xmas Red Stickles (Rouge glitter cardstock From American Crafts) on the outfit, flower and ballroom animal, so I can made the Rouge glitter cardstock into regular red color plus I add a swarvoski crystal hotfix on the flower as well. American Crafts Glitter cardstock have a nice set of different colors, I normally get the sheet of 12 muiti stack come with one sheet of each colors. The glitter cardstock are not easy to rub it out, but when you using your cricut might need minor cleaning on blade housing by doing muiti cut the glitter cardstock is like a chipboard.

"All the Teddy Bear pieces cut @ 3 1/2" inches"

Occasion: Birthday
Cricut Cartridge: Teddy Bear Parade

Type of Card: Standard A2 Size Card (4 1/4" x 5 1/2")
Card Measurement: Cut 8 1/2" (Length) x 5 1/2" (Wide) Score in half  @ 4 1/4" 

Mats (2) Size: 4" x 5 1/4"

Materials I use on this card are:
  • Stampin Up Card Stock Current Colors and Retire Colors
  • Dry Adhesive, 2 Ways Glue Pen and Scotch Quick-Dry Adhesive 
  • Stampin Up Dimensional  
  • Stampin Up Dazzling Diamond Glitter  
  • Glitter Specialty Paper From American Crafts Rouge (Red)
  • Swarvoski Crystal Flatback "Citrine" ss16 (4mm) Hotfix
  • Xmas Red Stickles
  • Sakura White Gel Pen  
  • Cuttlebug Embossing Folder "Happy Birthday"  

School Teddy Bear Girl Card

This card can give to a special classmate or friend in your class as cheer someone up when she is down whatever reason, you can write your own message or stamp your own sentiment inside of the card and also can use sticker too. I have issue with rouge glitter cardstock from American Crafts, because the red is too light, so what I did was apply Xmas Red Stickles on the glitter cardstock to make it darker.

"All the Teddy Bear pieces cut @ 3 1/2" inches"

Occasion: Just Because
Cricut Cartridge: Teddy Bear Parade

Type of Card: Standard A2 Size Card (4 1/4" x 5 1/2")
Card Measurement: Cut 8 1/2" (Length) x 5 1/2" (Wide) Score in half  @ 4 1/4" 

Mats (2) Size: 4" x 5 1/4"

Materials I use on this card are:
  • Stampin Up Card Stock Current Colors and Retire Colors
  • Glitter Specialty Paper From American Crafts Black and Rouge (Red)
  • Dry Adhesive, 2 Ways Glue Pen and Scotch Quick-Dry Adhesive   
  • Swarvoski Crystal Flatback "Crystal" ss16 (4mm) and ss5 (1mm) (Hand apply with E6000 Glue and Hotfix)
  • Xmas Red Stickles
  • Sakura White Gel Pen  
  • Cuttlebug Embossing Folder "Swiss Dots"  

Wednesday, January 16, 2013

Queen Teddy Bear of Hearts Card

I have other card for you today, this is Queen Teddy Bear of Hearts card for someone who are into playing card game or for Valentine's Day this is perfect card to give to someone special. I have issue with rouge glitter cardstock from American Crafts, because the red is too light, so what I did was apply Xmas Red Stickles on the glitter cardstock to make it darker. I also pop-up the hearts with Dimensional cut in small pieces to apply on it, I love to give as 3D looks to my card.

"All the Teddy Bear pieces cut @ 3 1/2" inches"

Occasion: Just Because
Cricut Cartridge: Teddy Bear Parade

Type of Card: Standard A2 Size Card (4 1/4" x 5 1/2")
Card Measurement: Cut 8 1/2" (Length) x 5 1/2" (Wide) Score in half  @ 4 1/4" 

Mats (3) Size: 4" x 5 1/4" and 3 3/4" x 5"

Materials I use on this card are:
  • Stampin Up Card Stock Current Colors and Retire Colors
  • Glitter Specialty Paper From American Crafts Black, Chestnut (Brown on the nose), Rouge (Red), and White
  • Dry Adhesive, 2 Ways Glue Pen and Scotch Quick-Dry Adhesive  
  • Stampin Up Dimensional 
  • Xmas Red Stickles
  • Sakura White Gel Pen  
  • Cuttlebug Embossing Folder "Queen of Heart"  

Tuesday, January 1, 2013

New Years Teddy Bear Birthday Card

Hello Everyone,

Today, we will start off with the first card of new years. This is New Years Birthday Teddy Bear card for Adults, Teens or Child's who born on New Year's Eve or Day, if you decided to need this image for your card. I will recommended you to cut @ 3" inches instead of 3 1/2", because it don't have enough room to put the ballroom and cupcake on the bear's hand plus it will stick out little from the card.

"All the Teddy Bear pieces cut @ 3 1/2" inches"

Occasion: Birthday
Cricut Cartridge: Teddy Bear Parade

Type of Card: Standard A2 Size Card (4 1/4" x 5 1/2")
Card Measurement: Cut 8 1/2" (Length) x 5 1/2" (Wide) Score in half  @ 4 1/4" 

Mats (2) Size: 4" x 5 1/4" 

Materials I use on this card are:
  • Stampin Up Card Stock Current Colors and Retire Colors
  • Glitter Specialty Paper From American Crafts Black, Sliver, Chestnut (Brown on the nose) and White
  • Dry Adhesive, 2 Ways Glue Pen and Scotch Quick-Dry Adhesive
  • Stampin Up Dazzling Diamond Glitter 
  • Sakura White Gel Pen  
  • Cuttlebug Embossing Folder "Happy Birthday"   

Happy New Years Everyone

Hi Everyone,

First of all, I would like to say Happy New Years to all of you who follow or visits my blog. Starting this year I will be working on Teddy Bear Parade Series throughout the year, to show you what kind of outfits these Teddy Bear has in this cartridge plus this cartridge is super popular as well. I also will working with other cartridges too not only Teddy Bear Parade, this year I'm using Specialty Glitter Cardstock from American Crafts, Stickles and Pattern Stack on my cards, so my cards can stand out more not looks too boring from other people who visit my blog and refreshing. I probably use embossing power for first time not sure yet. Not any craftiers use Glitter Cardstock for their projects, only pattern stack, die cut and stamp images. I have a lot of craft projects and cards in store for all of you, so stay tuned.

Happy Crafting For 2013 !!!

Thursday, July 26, 2012

I Pad Case with Bling Bling Stylus

Hi Everyone,

My I Pad case and Stylus finally arrive today from Blingit4you.com, this idea came from browsing around on Google image and thegreetingfarm.com. The whole idea behind this case was me, because I'm college student and I'm also a greek in Pre-Law and Criminal Justice System. Blue Ziron is my birthstone, so that how I came up with my background, I also love hearts, so I chose Lt. Amethyst as my hearts bubble blend in with Blue Ziron fallin down in the background. The stylus I done one before unfortunately mine fall apart on me around three months, I guess I didn't put enough glue or something E6000 glue dry fast after apply. On the stylus I pick out four shades of colors blend it together like Dark to Light colors, come out so pretty with the four shades of colors. This I Pad case and stylus are crystallize with all different sizes of Swarvoski Crystal flatbacks.

"Meet Cheeky Greek From The Greeting Farm in the Bling Bling Style"

"SS12 (3mm) Bling Bling Stylus"

Top: Crystals Colors are Fuchsia, Rose, Lt. Rose and Clear Crystal.

Bottom: Crystals Colors are Carpi Blue, Sapphire, Lt Sapphire and Clear Crystal.

Created: July 2012

Sunday, April 8, 2012

Easter Card

Happy Easter Everyone !!!


Occasion: Seasonal Holiday
Cricut Cartridge: Create a Critter

Type of Card: Standard A2 Size Card (4 1/4" x 5 1/2")
Card Measurement: Cut 8 1/2" (Length) x 5 1/2" (Wide) Score in half 4 1/4"

Mats (2) Size: 4" x 5 1/4" 

Material I use on this card are:
  • Stampin Up Card Stock Current Colors and Retire Colors
  • Dry Adhesive and 2 ways Glue Pen
  • Stampin Up Dimensional
  • Cuttlebug Embossing Folder "Swiss Dots"
  • Wiggle Eyes (5MM)

    Saturday, February 25, 2012

    Clown Birthday Card

    "All the Pieces cut out @ 4" Inches"

    Occasion: Birthday
    Cricut Cartridge: Paper Doll Dress up

    Type of Card: Standard A2 Size Card
    Card Measurement: Cut 8 1/2" (Length) x 5 1/2" (Wide) Score in half 4 1/4" x 5 1/2" 

    Mats (2) Size: 4" x 5 1/4" 

    Materials I use on this card are:
    • Stampin Up Card Stock Current Color and Retire Color
    • Glitter Specialty Paper From American Crafts (Aqua)
    • Dry Adhesive, 2 Ways Glue Pen and Scotch Quick-Dry Adhesive
    • Stampin Up Dimensional
    • Stampin Up Pastels Chalk (Pretty in Pink)
    • Sakura White Gel Pen  
    • Cuttlebug Embossing Folder "Happy Birthday"
    • Peachy Keen Stamps Every Day Character Face Assortment (3/4" Face)
    • Memento Tuxedo Black ink Pad

    Magician Birthday Card

    Hello Everyone,

    "All the Pieces cut out @ 4" Inches"

    Occasion: Birthday
    Cricut Cartridge: Paper Doll Dress up

    Type of Card: Standard A2 Size Card
    Card Measurement: Cut 8 1/2" (Length) x 5 1/2" (Wide) Score in half 4 1/4" x 5 1/2" 

    Mats (2) Size: 4" x 5 1/4" 

    Materials I use on this card are:
    • Stampin Up Card Stock Current Colors and Retire Colors
    • Glitter Specialty Paper From American Crafts (Black)
    • Dry Adhesive, 2 Ways Glue Pen and Scotch Quick-Dry Adhesive
    • Stampin Up Dimensional
    • Stampin Up Pastels Chalk (Pretty in Pink)
    • Sakura White and Sliver Metallic Gel Pen
    • Cuttlebug Embossing Folder "Happy Birthday"
    • Peachy Keen Stamps Every Day Character Face Assortment (3/4" Face)
    • Memento Tuxedo Black ink Pad

    Panda I Pod Touch 4 Generation Case

    Hi Everyone,

    I would like to share with you other case I ordered From Blingit4you.com, this is handcrafted I Pod Touch 4 Generation Case with Swarvoski Crystal flatbacks I got this case for my niece as birthday gift and award for working so hard at school. She is on her 2nd or 3rd year in college, I thought this will be awesome gift for her also she like Panda, so I came up with this idea for her case from the keychain (Panda with Heart) that I purchase from Kumacrafts @Etsy. The swarvoski crystal flatback colors I pick out blend with the image very well together. 

    "Panda With Heart I Pod Touch 4 Generation Case"

    Created: February 2012

    Tuesday, February 14, 2012

    Happy Valentine's Day Card

     Happy Valentine's Day Everyone,


    Occasion: Seasonal Holiday
    Cricut Cartridge: Sweet Hearts

    Type of Card: Standard A2 Size Card (4 1/4" x 5 1/2")
    Card Measurement: Cut 8 1/2" (Length) x 5 1/2" (Wide) Score in half 4 1/4"

    Mats (3) Size: 4" x 5 1/4", 3 1/4" x 4 1/4" (Real Red Card stock) and 3" x 4" (Regal Rose Card Stock)

    Materials I use on this card are:
    • Stampin Up Card Stock Current Colors and Retire Colors
    • Stampin Up Dimensional 
    • Stampin Up Corner Ticket Punch
    • Glitter Specialty Paper From American Crafts Lavender (Grape) and Sliver 
    • Dry Adhesive and 2 Ways Glue Pen 
    • Pearl Stickers From Recollections
    • Cuttlebug Embossing Folder "Swiss Dots and Birds and Swirls"

    Monday, February 13, 2012

    Laser Cut Acrylic Pendant Key Chains

    Hi Everyone,

    I receive my key chains in the mail today, I'm so happy it came in time for Valentine's day. I purchase this key chains from Kumacrafts @ Etsy, O.M.G. they look awesome in person and can't wait give them away as gift. The items came with business card, discount code and some extra goodies. You have a choice to chose as pendant with chain or key chain just write a message to the seller, then she will confirm your order what you want before ship out to ya.

     "Chocolate Cupcake"

     "Cat with Cupcake"

    "Panda with Heart"

    Disney Princess Belle Swarovski Crystal Bling Heart ID Badge Holder

    I purchase Disney Princess Belle Swarovski Crystal Bling Heart ID Badge Holder from Sparkling Hope @ Etsy, this item is handcrafted from her daughter to help pay for her medical expense to continue her care. I believe her daughter waiting for kidney match from transplant, I'm not really sure that is it or her daughter already as.

    Saturday, February 4, 2012

    My MacBook Pro Case Cover

    Hi Everyone,

    I been waited almost 2 months for my custom made MacBook Pro case cover, finally my MacBook Pro Case arrive today. I ordered last December (2011) on my birthday from Blingit4you.com, it's not my first time ordered from them, I'm return customer they did awesome work with my cover. You can send them whatever image that you want then they will let you know by E-mail if they can do it included quote how much will cost from the custom made item. This is my first Macbook Pro case cover been waited for long time to get one made. My idea came to live and I'm really happy from the outcome of this cover. This MacBook Pro case are crystallize with all different sizes of Swarvoski Crystal flatbacks.


    "Meet Cheeky Beach From The Greeting Farm in the Bling Bling Style"

    Created: February 2012 

    Saturday, January 28, 2012

    Simple Birthday Card

    Hi Everyone,

    I would like to share with you tonight a simple birthday card, I normally don't cut letter out and hand apply on the card. I have trouble putting on a straight line, so what I did was I need a ruler as guide to help me apply the letters straight on my card. I haven't done that for long time. It take me three try finally got it right. My neighbor's sister birthday is coming up on Monday, I wasn't sure what she like, beside she enjoy being at beach and traveling. It take me couple of weeks to think about card idea, so I went to storybook cartridge I saw couple images that I can work with and come up with this simple and easy card. Fonts, Shadow Fonts and Butterfly cut @ 1" Inches. 


    Occasion: Birthday
    Cricut Cartridge: Storybook

     Type of Card: Standard A2 Size Card (4 1/4" x 5 1/2")
    Card Measurement: Cut 8 1/2" (Length) x 5 1/2" (Wide) Score in half 4 1/4"

    Mats (2) Size: 4" x 5 1/4" 

    Materials I use on this card are:
    • Stampin Up Card Stock Current Colors and Retire Colors
    • Glitter Specialty Paper From American Crafts Sliver and Pink (Lips Gloss)
    • Dry Adhesive and 2 Ways Glue Pen
    • Stampin Up Dimensional
    • Cuttlebug Embossing Folder "Bird and Swirls"
    Happy Crafting !!!

    Thursday, January 12, 2012

    Slice of Cake Treat Box

    Hi Everyone,


     "Cake Box Treat Box with Mini Note Card"
    "Top of the Lid Cake Box"

    Occasion: Birthday
    Cricut Cartridge: Sweet Tooth, Sweet Treat, Sweet Treats and Plantin SchoolBook

    Box Measurement: All Pieces cut @ 6" inches and Lid cut @ 6 1/4" inches

    Materials I use on this card are:
    • Stampin Up Card Stock Current Color and Retire Color
    • 2 Ways Glue Pen and Scotch Quick-Dry Adhesive
    • Stampin Up Dimensional for the Flower
    • Stampin Up Dazzling Diamond Glitter
    • CuttleBug Embossing Folder "Swiss Dots and D'vine Swirl"
    • Swarvoski Crystal Flatback "Crystal" ss20 (5mm) (Hand apply with E6000 Glue)    
    Have a Good Weekend !!!

    Sunday, January 8, 2012

    50's Drive In Birthday Card

     Hi Everyone,

    I never made a card as Gate fold before, I been trying to do that for a long time and finally I got the measurement right. I have no idea where is 1/8" or 3/8" on the score board. My neighbor's sister is turning 50 years old, I thought this will be fun to use the Drive-in sign from Nifty- Fifties Cartridge. The sign pointing that way, when she open the card there are surprise party inside the card. All the pieces cut @ 4" inches, inside of card I just add Mrs. Grossman's Sticker and make sure I have enough room for my neighbor to write her message in the card.


    Occasion: Birthday
    Cricut Cartridge: Nifty Fifties

     Type of Card: Gate Fold Card
    Card Measurement: Cut 8 1/2" (Length) x 5 1/2" (Wide) Score 2 1/8" and 6 3/8"

    Mats (3) Size: 4" x 5 1/4" (center of the card), 2 pieces of 2" x 5 1/4" for the gate cover

    Materials I use on this card are:
    • Stampin Up Card Stock Current Colors and Retire Colors
    • Stampin Up Dazzling Diamond Glitter 
    • Glitter Specialty Paper From American Crafts Gold
    • Dry Adhesive, 2 Ways Glue Pen and Scotch Quick-Dry Adhesive
    • Stampin Up Dimensional (Back of Arrow on Drive in Sign)
    • Cuttlebug Embossing Folder "Swiss Dots"
    • Memento Tuxedo Black ink Pad